Special Recommendations
In case nose heavy
:
At last Reminder
must let fuselage drying at least 12 hours after gluing together
to avoid that problem
:
plane still nose heavy diving a lot even if CG is at Point B
Elevator up approximately 1 5MM travel as following picture
CG is still between A and B
.
.
.
What caused
Horizontal wing should be exactly horizontal but fuselage tail section
has to be molded by two half
transportation may caused horizontal
wing to be deformed or not drying properly after gluing etc
All of these may caused horizontal wing picth up
a picth up horizontal wing definitely forced the plane nose down diving
But But if installing properly and horizontal wing not deformed
this won t happened
Solutions
:
?
,
.
'
!
We have solved potentional problem
by new desgin
and improving Mould making but what ever in case
we still introduce this for your reference
s
Finwinghobby com
.