Fintek OSLO 3.0, Installation And User Manual

Page: 18 / 23

3.USE AND MAINTENANCE
ENGLISH
3. 12 On board control function only for OSLO 4.0
@ ©
®
®
®
(D RUNNING LED :Signal the working state of compressor
@ ON/OFF BUTTON : turn on or turn off the air conditioner
@ MODE BUTTON: Set up the air conditioner operating mode
© COOLING LED :Signal the cooling state
@ HEATING LED: Signal the heating state
® ELECTRICAL HEAT BUTTON: Turn on or turn off the electrical heat.
0 ELECTRICAL HEAT LED: Signal the electrical heat state.
® DOWN BUTTON : Decrease the temperature and time
® UP BUTTON: lncrease the temperature and time
@) FAN SPEED BUTTON: Set up the fan speed
@ HIGH SPEED LED: Signal the high speed working state
@ MIDDLE SPEED LED :Signal the middle speed working state
@ LOW SPEED LED: Signal the low speed working state
@ AUTO FAN LED: Signal the automatic fan state
lf you select the AUTO speed, the fan speed is according with the room
temperature and setting temperature.
Room temperature-setting temperature>5'C, high speed.
Room temperature-setting temperature>3'C,middle speed.
Room temperature-setting temperature>1 'C,low speed.
@ Temperature display window
The display will show both setting temperature and ambient temperature.
After adjusting the setting temperature, the setting temperature will flash
15 minutes on the display, then the display will show the ambient
temperature for 70 seconds. After that, the display will be off until next
adjustment.