Fintek iCOOL, Technical Manual

Page: 30 / 31

12. Problem and solution
Problem possible causes
• The air conditioner does not work
Th i diti d t f i t th • The air conditioner does not refrigerate the room
• Strange smell in the room. Water drips from the air conditioner.
• The remote control doest not work.
• The air conditioner does not work for 3 minutes when switched on.
Possible solutions
1. Wrong setting the timer / check it.
2. Problems on the power supply / check it
3. The filter could be dirty / clean it
4. The room temperature is too high / wait until the temperature goes down
5. The temperature is not properly set / check it
6. The grids could be obstructed / check and remove the eventual obstacles
7. Dampness in the room, coming from walls, carpet, furnishing or similar p g p g
8. Wrong installation of the air conditioner
9. Wrong connection of the drainage pipe
10. Exhausted batteries
11. Wrong insertion of the batteries inside the remote control
12. Protection of the air conditioner. Wait for 3 minutes and the air conditioner will start to work again.
REMARK: REMARK:
If the supplied cord is damaged, it must be replaced again.
The max operation temperature for the air conditioner:
Max cooling: outdoor DB43 ć / WB26 ć , indoor DB32 ć / WB23 ć ,
min heating: outdoor DB-5
ć
/ WB-6
ć
, indoor DB20
ć