Finn HydroSeeder T170, Parts And Operator'S Manual

Page: 17 / 77

1. DISCHARGE THROUGH BOOM:
Flow is through boom with no flow through closed
recirculation valve (Figure 5). Flow through boom is
controlled by engaging and disengaging slurry pump
clutch.
NOTE:
Do not use the discharge valve to con-
trol distance. Valve should be complete-
ly open. Control the spray volume and
spray distance by adjusting the engine
RPM.
2. EXTENSION HOSE THROUGH BOOM:
Flow is through boom with no flow through closed
recirculation valve (Figure 5). Extension hose is con-
nected to boom and flow is controlled by engaging and
disingaging pump clutch or by adjusting engine RPM.
DANGER
Do not use remote valve in this application. Failure to comply WILL result in severe personal
injury or death.
3. EXTENSION HOSE OR HOSE REEL THROUGH REMOTE PORT:
Flow is through recirculation with no flow through
closed discharge valve (Figure 6). Flow through hose
is controlled by engaging and disengaging slurry pump
clutch or by remote valve at end of hose. An open
recirculation valve allows flow back into tank when the
remote valve is closed.
DANGER
Recirculation valve must be open and material should be flowing back into tank when using a
remote valve. A closed or plugged recirculation line will cause extreme heat. Failure to comply
WILL cause severe personal injury or death.
Figure 6 – Discharge Through
Extension Hose or Hose Reel
TANK
CLOSED
OPEN
FLOW
FLOW
11
TANK
CLOSED
OPEN
FLOW
Figure 5 – Discharge Through Boom