STEP 5
RECEIVER RX/ TX LEDs ARE FLASHING AND REM OTE RX/ TX LEDs ARE FLASHING BUT NOT
CONTROLING M ACHINE
THIS GUIDE APPLIES TO 12 SERIES M ACHINES
RX #2 LED
TX #3 LED
TROUBLESHOOT RECEIVER
IF NO PART OF THE M ACHINE CAN BE CONTROLLED:
CHECK SUPPLY VOLTAGE:
IS SUPPLY VOLTAGE OVER 28 VOLTS? (NOTE: VERY FAST “ SPIKES” COUNT—
M AY NOT BE DETECTIBLE ON M OST DIGITAL VOLT M ETERS)
YES:
THE RECEIVER IS FAULTING ON AN OVER-VOLTAGE CONDITION;
REQUIRES POWER CYCLE (TURN OFF, TURN ON) TO REGAIN
CONTROL. INSPECT POWER SUPPLY (BATTERY, BATTERY LUGS,
ALTERNATOR, WIRING) AND CORRECT ANY ISSUES
NO:
CONTINUE TO NEXT STEP
11
