FINN & WINSTON FW811047 Manual Download Page 2

Failure to follow these warnings and the assembly instructions could result in serious injury or death.

If this gate is to be used with children:

1.  Install according to manufacturer’s instructions.
2.  This gate is suitable for openings up to 71 cm and 122 cm (28”- 48”).
3.  Use only with the locking/latching mechanism securely engaged.
4.  This product is intended for use with children from 6 – 24 months.
5.  Never leave child unattended. This product will not necessarily prevent all accidents.
6.  Never use with a child who is able to open or climb over the gate.
7. 

WARNING:

 Incorrect fitting or positioning of this safety barrier can be dangerous.

8.  To prevent serious injury, never allow adults, children or pets to climb over or under the gate, 
  as it may damage this safety gate.
9.  The surfaces that the safety gate is to be fixed to must be suitable for the purpose and must be
  structurally sound. 

NOTE:

 Do not use this gate if it can’t be installed to walls, door frames or

  posts – tightly and flatly.
10. 

DO NOT

 install this gate to hollow walls.

11.  This safety gate must 

NOT

 be fitted across window openings and the like.

12. 

NOTE:

 Never use without Locking Hooks.

13.  Securely install and operate the gate according to instructions to help prevent accidental injury.
14.  Do not use the safety gate if any components are damaged or missing.
15.  Install this gate away from heaters and other sources of heat.
16.  This gate must 

NEVER

 be used as a pool or pond barrier.

17.  Gate is not meant to replace proper adult supervision.
18.  Always check that gate is locked after closing gate.
19.  If the gate is used at the bottom of the stairs to prevent the child from climbing up the stairs, 
  it must be placed on the lowest stair.
20. If the gate is to be used at the top of the stairs to prevent the child from falling down the stairs,
  it must not be placed on any stair below the level of the top stair. At the top of the landing,
  position the gate 15 cm (6”) away from the top step.
21.  Spacers are required when fitting gate to skirting board.
22. This product requires adult assembly.
23.  For indoor use ONLY.

WARNING 

– The position of the safety barrier in relation to the stairs may have an adverse  

effect on your child’s safety. 

KEEP INSTRUCTIONS FOR FUTURE USE.

 If you sell or give away  

this product, make sure to give this instruction manual to the new owner.

2

WARNING

!

Need assistance?  
Call our toll-free Consumer Relations help line at 1-800-667-4111  
(Monday to Friday 8:30a.m. to 5:00p.m. - Eastern Time)

SOME ASSEMBLY REQUIRED

Gate Warnings

Summary of Contents for FW811047





























Reviews: