ENGLISH
Instruction Manual
D-USE AND MAINTENANCE
* You are advised to start your device before starting cooking. Keep your device operating for 15 minutes after finishing cooking in order to
eliminate the food smell in the room.
* The oil filter will capture oil particles in the room and this filter might get clogged in accordance with your frequency of use. Comply with the
following instructions and clean your filter at least once in every 2 months in case of risk of fire.
* Remove the filter from your device. Wash it using any type of natural detergent in water and rinse it thoroughly without leaving detergent
residues on it.
* Rinse with warm water and leave it to dry.
* You can wash your filter in your dish washer (max 40 C).
* The aluminum panel will change color after being washed a couple of times. This is totally normal and it will not cause any functional problem.
* The function of the carbon filter is to clean the air in the room. Carbon filters should be cleaned regularly and replaced within every 3 to 6
months in accordance with your frequency of use.
* Clean the surface of your device using a damp piece of cloth and a non-abrasive detergent. Do not, under any circumstances, clean it using
abrasive substances like vitriol or bleachers or rough pieces of sponge. You are advised to use cleaning products of the brand or other brands for
inox maintenance.
* The lighting system is designed to be used while cooking. It should not be used to illuminate the room for prolonged periods. This might damage
the lighting equipment.
E-FILTERS
Aluminum cartridge filters are used in all of our products in order to capture oil particles sucked along with food vapor before they enter the
device. These filters vary in size and type in accordacne with the product series and types. They are easy to remove and reassenble. They can
washed in hand without applyinh pressure or impacts using natural detergents and they can be washed in dish washers as well. Cleaning filters
once in every 2 to 3 months in accordance with frequency of use is crtitical for both fire safety and device efficiency.
More sensitive optional YKF A, AC, B, C, E, F and YKAF-A type carbon filters can also be used in all of our products in accordance with product
series and types in order to evacuate oil particles in the air and odour in special cases where the indoor air cannot be evacuated. Carbon filters
should be replaced in every 3 to 6 months in accordance with stove and cooking systems. Type YKF A, AC,C, E : After locating the carbon filter
on the lugs at both sides of the plastic engine body, turn it 90° (a quarter turn) and the assembly will be completed when you hear the ‘click’
sound. Retrace these steps to disassemble it (Figure E, H). Type YKF-B, F: This should be located in front of the metal box in which the engine kit
is located. Locate the lugs under the filter on the holes on the surface of the box which faces the wall and finish the assembly by pushing the clips
on the upper section of the filter towards the inside of the box (Figure F). If the engine is located inside a metal box in your product, then type A,
AC, C, E carbon filters are convenient for your product. Type A carbon filters are used for flush ventilation hoods. In case you need YALF and
YKF filters, they can be purchased from the authorized service provider or our company after selecting your filter from the figures in subsection 3
of the Technical Section.
F- CONTROLLER TYPES AND USE
Controller types which vary depending on your product model are described below. You can determine the controller type for your product by
checking the product code section of Article H.
TYPE PB - PUSH BUTTON REMOTE CONTROLLED TYPE
It can be used in all types of engines with 3 rotation speeds.
Lamp Button:
It turns the lamp on and off.
Rotation Speed Buttons:
You can adjust engine rotation speed by pressing the 1, 2 and 3 buttons.
Engine Shutdown:
The engine can be shut down by pressing the 0 button.
G-TROUBLESHOOTING
* The device will not start: First, check power connection. If you have a slider ventilation hood, check whether the slider plate is pulled.
If the device will not start although there are no power connection problems, expert service personnel will help you.
Call the service and do not try to manually repair it by yourself. Otherwie, your device’s warranty will become void.
* Device suction is insufficient: If you are using a carbon filter, its life of service might have expired. Replace it. If you do not use a carbon filter,
your aluminum filter might need cleaning. Check that the chimney is blocked.
* The light will not be lit: The lighting bulbs might have gotten losse. If so, retighten them. If they are out of order, replace them. Maximum light
bulb power is specified on the device.
Summary of Contents for OPERA CL11-60X
Page 8: ......
