- 38 -
SPDIF Out
6.
outputs audio signals of the currently watched source.
Use an
SPDIF cable
to trasfer audio signals to a device that has SPDIF input.
Viewing the Connections - Side Connectors
The CI Slot is used for inserting a CI card. A CI card allows you to view all the
1.
channels that you subscribe to. For more information, see “Conditional Access”
section.
Side USB input.
2.
Component Video Connection (YPbPr)
3.
is used for connecting component
video.
You can connect the component video sockets with a device that has component
output. To do this, you must use the supplied Component video connection cable
IRUHQDEOLQJFRQQHFWLRQ)LUVWSOXJVLQJOHMDFNRIWKHFDEOHWRWKH79¶V<3E3U
VRFNHW*5((1VLGH$IWHUZDUGVLQVHUW\RXUFRPSRQHQWFDEOH¶VQRWVXSSOLHG
connectors into the multiple-part of the Component video connection cable.
Colours of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE)
to enable sound connection when connecting a device to your TV by using PC or
COMPONENT VIDEO input.
Side audio-video connection
4.
input is used for connecting video and audio
signals of external devices. To make a video connection, you must use the
supplied AV connection cable for enabling connection. First, plug singular jack of
WKHFDEOHWRWKH79¶V6LGH$9VRFNHW$IWHUZDUGVLQVHUW\RXUYLGHRFDEOH¶VQRW
supplied) connector into the YELLOW input (located on the plural side) of the
supplied AV connection cable. Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV connection cable.
$IWHUZDUGVLQVHUW\RXUGHYLFH¶VDXGLRFDEOH¶VFRQQHFWRUVLQWRWKH5('DQG:+,7(MDFNRIWKH
supplied
side AV connection cable. Colours of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound
connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.
The headphone jack is used for connecting an external headphone to the system. Connect to the
5.
HEADPHONE jack to listen to the TV from headphones.
Volume/ Programme/ Source and Standby-On switch
6.
Power Connection
IMPORTANT
: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
D
I
H
M
1
SPDIF
Coax.OUT
D
I
H
M
2
Aerial or Cable
SIDE
AV
YPbPr
MODE
o
5Vdc
Max:500mA
