Finlux FL4310CB, Owner'S Manual

Page: 7 / 16

Getting Started
English - 22 -
Remote Control
1. Standby: On / Off switch of the TV
2. Numeric buttons: Used to navigate channels and enter
passwords, text etc.
3. TV: Displays channel list / Switches among broadcast
types
4. Mute: Completely turns off the volume of the TV
5. /-
6. Menu: Displays TV menu
7. Navigation buttons: Helps navigate menus, content
etc. and displays the subpages in TXT mode when
pressed Right
8. OK: Confirms user selections, holds the page (in TXT
mode), views channel list (DTV mode)
9. Back: Returns to previous screen, opens index page
(in TXT mode)
10. Media browser: Opens the media browsing screen
11. Info: Displays information about on-screen content,
shows hidden information (reveal - in TXT mode)
12. My button 1 (*)
13. Coloured Buttons
14. Language: Switches between sound modes (analogue
TV), displays and changes audio/subtitle language
(where available)(digital TV)
15. Subtitles: Turns subtitles on and off (where available)
16. Rapid reverse: Moves frames backwards in media such
as movies
17. Record: Records programmes
18. Play: Starts to play selected media
19. Stop: Stops the media being played
20. Rapid advance: Moves frames forward in media such
as movies
21. Pause: Pauses the media being played, starts timeshift
recording
22. Screen: Changes the aspect ratio of the screen
23. Text: Displays teletext (where available), press again
to superimpose the teletext over a normal broadcast
picture (mix)
24. My button 2 (*)
25. EPG (Electronic programme guide): Displays the
electronic programme guide
26. Exit: Closes and exits from displayed menus or returns
to previous screen
27. Quick Menu: Displays a list of menus for quick access
28. No function
29. Pro/-
30.
Swap: Quickly cycles between previous and current
channels
31. Source: Shows all available broadcast and content
sources
(*) MY BUTTON 1 & MY BUTTON 2:
These buttons may have default functions depending
on the model. However you can set a special function
to these buttons by pressing on them for five seconds
when on a desired source or channel. A confirmation
message will be displayed on the screen. Now
the selected MY BUTTON is associated with the
selected function.Note that if you perform First Time
Installation , MY BUTTON 1&2 will return to their
default function.