Operating Instruction
Before using for the first time
1.
Pour water into water tank and the water level should not exceed the "max" mark.
2.
Plug in and press the power button. At this time, the upper indicator light flashes
blue. Press the Manual Cup to work the pump, pumping water from the water tank to
the machine for heating.
3. The machine starts to preheat, at this time, the coffee switch indicator flashes; when
the indicator light stops blinking and turns normal on, the warm-up is completed, it
takes about 2 minutes.
4. Press the button "Auto Single Cup" to let the hot water out to wash the coffee filter
and the cup.
How to make coffee
1. While the machine is preheating, you can put the ground coffee powder (you
should use the No. 1 powder, not too thick or too thin) into the "filter" and then use
the measuring spoon to press it tightly; at the same time, wipe the coffee powder on
the edge of the funnel with a brush or hand (if you need to make 1 cup, use a cup of
filter, and 2 cups with 2 cups of filter).
2. Insert the powder-filled funnel as indicated and lock it, then place the coffee cup
under the funnel.
3. Press the “Auto Single Cup” button, and start to flow out a cup of coffee (or press
the “double cup” button to flow out 2, or press the “manual coffee” button to flow out
coffee as needed).
4. Adjust the position of the coffee cup at the same time, let the coffee flow along the
cup wall.
5. Wait a minute for coffee dripping and the coffee is ready!
Steam foaming function
1. Press the “Steam” button, the indicator will turn red and flash until the indicator
light changes from blinking to steady light and the preheating is complete.
2. Pour the whole milk of ice into the 1/3 of the pitcher, insert the steam nozzle into
the surface of the milk at 1CM, and then slowly unscrew the “Steam Knob” until
steam starts to eject.
(Note: The amount of steam can be adjusted according to the individual's proficiency.
Before froth the milk foam, you should release the water in the steam tube.)