English
- 64 -
Connections
Antenna Connection
Connect the aerial or cable TV plug to the AERIAL INPUT (ANT-TV) socket located on
the rear bottom side of the TV.
Note:
When connecting a device
via the YPbPr or Back AV input, you
must use the connection cables
to enable connection. See the
illustrations on the left side. | To
enable PC/YPbPr audio, you will
need to use the Back Audio inputs
with a YPbPr/PC audio cable for
audio connection. | When using
the wall mounting kit (contact your
dealer to purchase one, if not
supplied), we recommend that you
plug all your cables into the back of
the TV before mounting on the wall.
| Insert or remove the CI module
only when the TV is SWITCHED
OFF. You should refer to the module
instruction manual for details of the
settings. | The USB 2.0 inputs on
the back side and on the left side
of the TV support devices up to
500mA. Connecting devices that
have current value above 500mA
may damage your TV. If available,
for the USB 3.0 input on the left side
of the TV, which will be positioned
above the other USB input, this
limit value is 1A. | By connecting
an HDMI cable to your TV, you
have to use only a shielded (high
grade) HDMI cable with ferrites to
JXDUDQWHHDVXI¿FLHQWLPPXQLW\DQG
emission against parasitic frequency
radiation. And make sure to use a
High-Speed HDMI cable that can
transmit high definition signals,
such as 4K contents, for trouble-free
transmission.
If you want to connect a
device to the TV, make
sure that both the TV
and the device are turned off
before making any connection.
After the connection is done, you
can turn on the units and use
them.
Connector
Type
Cables
Device
Scart
Connection
(back)
YPBPR
YPbPr Video
Connection
(back)
YPbPr Connection Cable
HDMI
Connection
(bottom&side)
VGA
Connection
(bottom)
AUDIO IN
PC/YPbPr/
Back AV
Audio
Connection
(back)
YPbPr/PC Audio Cable
SPDIF
SPDIF
(Optical Out)
Connection
(bottom)
BACK AV
Back AV
(Audio/Video)
Connection
(back)
Audio Video Cable
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(back&side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(bottom)
LAN / Ethernet Cable
Subwoofer
Connection
(back)(*)
(*)
For external subwoofer connection
aerial
or
cable
