Finlux 47FLSY170LHD, Owner'S Manual

Page: 46 / 101

English - 45 -
Menu Features and Functions
Picture Menu Contents
3D Settings Press to view 3D settings.
Mode
For your viewing requirements, you can set the related mode option. Picture mode can be
set to one of these options:
Cinema , Game , Sports, Dynamic and Natural .
Contrast Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
Power Save Mode
To set Power Save Mode as Eco, Picture Off and Disabled. See the section, “Environmental
Information” in this manual for further information on Power Save Mode. If Picture Off is selected,
“Screen will be off in 15 seconds” message will be displayed on the screen. Select
PROCEED and press OK to continue. The screen will be off in 15 seconds. If you disable
Power Save Mode, Picture mode will be automatically set to Dynamic.
Backlight (optional)
This setting controls the backlight level and it can be set to Auto , Maximum , Minimum and
Eco Mode . Backlight function will be inactive if Power Save Mode is set to On. Backlight
cannot be activated in VGA, Media Browser mode or while the picture mode is set to Game.
Noise Reduction
If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting
to reduce the noise amount. Noise Reduction can be set to one of these options: Low ,
Medium , High or Off .
Advanced Settings
Dynamic Contrast
You can change contrast rate by using dynamic contrast function. Dynamic contrast can be
set to one of these options:
Low , Medium , High or Off.
Colour Temp Sets the desired colour tone.
Picture Zoom
Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.
Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching)..
Movie Sense
Movie Sense: Press Use “Left” / “Right” to set Movie Sense Low, Med, High or Off. While
Movie Sense is active, it will optimize the TV’s video settings for motional images to acquire
a better quality and readability.
When Movie Sense option is set to Low, Med or High, Movie Sense demo option will be
available. If one of these options is selected and if you press OK button, then the demo
mode starts. While demo mode is active, the screen will be divided into two sections, one
displaying the movie sense activity, the other displaying the normal settings for TV screen.
HDMI True Black
(optional) While watching from HDMI source, this feature will be visible in the Picture Settings menu.
You can use this feature to enhance blackness in the picture.
Film Mode
(optional)
Films are recorded at a different number of frames per second to normal television
programmes. Turn this feature on when you are watching ilms to see the fast motion
scenes clearly.
Skin Tone Adjust the desired skin tone.
Colour Shift Adjust the desired colour tone.
RGB Gain
Press OK
button to edit RGB gain. You can conigure the colour temperature values
using the RGB Gain feature.
Reset Resets the picture settings to factory default settings.
Autoposition
(in PC mode)
Automatically optimizes the display. Press OK to optimize.
H Position
(in PC mode)
This item shifts the image horizontally to right hand side or left hand side of the screen.
V Position
(in PC mode)
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock (in PC
mode) Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or text in smaller fonts.