Finkbiner Industries Mild HAVOC, User Manual

Page: 7 / 8

www.HavocAmps.com
Mild
H
AVOC
Preamplifier (Model 15209): User’s Manual 15166 Revision 0
7
and only with like specifications (see SPECIFICATIONS on page
7). If your amplifier is blowing fuses, send it in for service (see
SERVICE AND SUPPORT on page 3). Do NOT replace with a
larger current rating fuse.
10. LINE OUT (Unbalanced)
Accepts a 1/4” TS connector, and sends a line level signal to a
power amplifier, stomp box, mixing board, effects unit, etc.
Designed to produce a 0 dBV (1 volt RMS) signal. The
GAIN and
LEVEL controls are used in concert to adjust the level of this
signal.
SPECIFICATIONS

MODEL: 15209

INPUT IMPEDANCE: 1 MΩ

OUTPUT LEVEL: 0 dBV (1 volt RMS) nominal (see below), 1.5
volt RMS maximum

OUTPUT IMPEDANCE: < 1KΩ

POWER CONSUMPTION: < 15 watts 60 Hz, 120 VAC

FUSE: 5x20mm, 250V, 0.50 amp, ceramic, slow blow

DIMENSIONS: 19” x 8” x 3.5”

WEIGHT: 6 lbs

TUBES: (2) 12AX7