GETTING STARTED
Prior to your first use, test Naked Nails on a small area
on one of your nails. If there is a sensitive reaction,
discontinue use immediately. Use on nails only – do
not use on other body parts.
Inserting Batteries
• Unscrew battery compartment cover located at
the bottom of the unit (image 1).
• Slide battery holder out (image 2) and insert two
AA batteries (image 3) into the holder following
+/- indicators.
• Slide battery holder back into handle, following
the arrow indicator.
• Once batteries are correctly inserted, replace the
battery cover on the unit.
NOTE:
Only use new batteries of the same brand. Do not mix
alkaline, carbon-zinc, or rechargeable batteries. Do not mix
old and new batteries. Make sure the battery is inserted in the
proper direction on the battery holder. If the unit is not used for
a long period of time, remove the batteries from the unit.
Discard batteries according to the recycle regulations in your
community. If the batteries are placed in the unit incorrectly, the
unit will not work.
IMPORTANT:
Read all instructions and warnings prior to use.
• You should only use the Buffing attachment on your nails once every two weeks.
• Lightly glide the Buffing and High Shine rollers over nail surface for 1-2 seconds.
Do not over use product on nail surface.
• If your nails are brittle, we recommend using only once a month.
• Consult your physician prior to use if you have any nail or skin conditions.
Use only on dry nails. For best results, make sure nails
are clean.
1.
R
emove the clear protective cover from the
attachment before first use
(image 4).
2.
Select the cylindrical foam attachment you want and
make sure it is firmly attached before using.
3.
Turn the unit on by sliding the Power Switch located
on the side of the unit to LOW or HIGH (image 5).
4.
Lightly glide the selected attachment over the nail for
1 – 2 seconds at a time (image 6). Do not apply
pressure.
• AQUA – Files the nail
• PURPLE – Buffs ridges and imperfections on
nail surface
• WHITE – Shines nails
5.
When finished with each attachment, rinse and dry
nails thoroughly to get rid of any debris.
Replace the foam cylindrical attachments as needed for
best results. Attachments last through several sessions
depending on frequency of use and size of area.
• Make sure the unit is turned off.
• Pull the attachment off the top of the unit (image 7).
• Place a new attachment onto the head and press down
firmly (image 8).
• Check that the new attachment is firmly in place (not
loose or shaky) before turning the unit on.
Attachments that are nicked, worn, or broken could cause
damage to nails and should be replaced.
Do not expose Naked Nails to water or excess moisture.
For best
performance, clean Naked Nails after each use. Make sure the unit is turned off; lift
the cover and attachment from the unit. Remove debris with a soft, dry cloth or
towel. Wipe the body with a clean dry cloth and replace attachment/cover.
How to Use
Replacing the Attachments
How to Clean
Image 1
Image 3
Image 2
Image 5
Image 4
Image 6
Image 7
Image 8
