Sleep Mode
To conserve battery power, put your device in
Sleep Mode while it is not being used. Press and
hold the bottom-left
and
bottom-right buttons
together for 3 seconds to put to sleep. To wake-
up, simply press the top-left button.
Configure
If you haven’t already configured your device via
the Swimsense
®
Bridge, you may also configure
the device on the watch itself.
1)
From the Home screen, press
[ / ]
until you reach “Config”. Then press
[SEL]
.
2)
Press
[SEL]
to select a setting. Use
[ / ]
to adjust each setting,
[NEXT]
to
toggle to the next highlighted option on the
screen, then
[SAVE]
to confirm and exit.
Tip
: Watch Position (Left or Right wrist) and
Pool Size
must
be set correctly for each
workout. It is also recommended to set the
proper Date and Time so your workouts will be
organized correctly when you upload
8
