Charging
Make sure the USB is completely dry before
connecting.
1)
Pull the cap off the USB connector located
at the top of the AquaPulse™
2)
Insert the exposed USB connector into one
of the USB ports on your computer or into
a USB wall adapter. Make sure the
connector is properly oriented so that the
contact points are lined up to create a
secure connection.
3)
A green light will flash to indicate the
AquaPulse™ is charging
4)
The internal Lithium-ion battery will
charge through the USB port. A full charge
should take approximately 2 hours, and
provide approximately 8+ hours of usage.
5)
Once fully charged the green light will stay
lit instead of flashing
Carefully remove the AquaPulse™ and replace
the cap.
Note:
The computer will not recognize the
AquaPulse™ as it is not a memory storage
device. The computer or wall adapter is used
only for re-charging the internal battery.
5
