1
2
7
8
9
10
6
5
4
3
UnderstandInG the desIGn
Power supply/power input module
1
Connect this point to a AC 110 ~ 240V power source in order to
generate a 12VDC 3A power output.
2
By default, the -V and +V cables are connected to the inner parts
of the I/O board. .
note:
Please do not remove or change these cables
Power output/alarm module
3
Connect these cables to a 12VDC 3A (maximum output ampere)
alarm siren. Alarm siren will be triggered when residents push the
Panic Button in i-Neighbour App. Skip this step if you will not be using
the alarm siren.
note:
If you are using an alarm device that contains both siren and strobe
light, connect it to port (1) – Siren.
4
Ignore these ports as they are meant for manufacturer use only.
