21
CONTENTS
ID cameras during enrollment and verification, you can ad-
just the quality and the recommended value is 80. Menu >
System icon > Face > Quality > Input your value > Save
Log Settings
Every time Face ID is being used, transaction logs are kept in
the memory. The settings are for Face ID to regulate house-
keeping of logs.
Log Alert
When log storage is at a certain level, user/administrator
needs to be alerted to avoid underperformance of terminal.
The recommended value is . Menu > System icon > Log
Settings> Log Alert > Input your value > Save
Update Interval
Face ID needs to update transaction logs of all users in a time
interval to avoid duplication of punch period. The default in-
terval is 10 minutes. Menu > System icon > Log Settings>
Dup. Punch Period (m) > Input your value > Save
Defining Work Codes
Face ID provides work code feature which allowing user to
key in a predefined numbers after verification. The work code
numbers are predefined in Ingress. The following table is
showing examples of work codes.
Reasons
Work code
Check In
00
Check Out
01
OT start
04
Done
0
Sick Leave
10
Half-day Leave
12
Emergency Leave
11
Meeting Client
20
Outstation
21
Workcode Mode 1:
Verification followed by work code
Workcode Mode 2:
Work code followed by verification
Menu > System icon > Log Settings> Workcode Mode >
Choose your preference > Save. To add work code through
Face ID, please refer to page 21.
Using Card Only
Face ID allows combination of verification methods to
achieve tighter security. This feature concentrates on card
verification. You can enable or disable Card Only feature by
choosing Y or N.
Y –
Face ID only reads information from card to verify users.
N –
Face ID requires other verification methods following
reading of the card.
Menu > System icon > Log Settings > Card Only > Y or N >
Save