4
5
6
1
2
4
INPUT : AC
110
~
240V
OUTPUT :
DC
12V
3A
3
Identify a location to mount the
AdapTec TA on a wall.
Fix the AdapTec TA onto the wall
by tightening the screws into the 4
holes.
Remove the L-shape piece from the AdapTec TA
Open the cap, look for the part shown in
the diagram and you will see 2 holes.
Install the piece to the AdapTec TA
The other 2 holes at the bottom
Mount the AdapTec TA on a wall
WIRING DIAGRAMS
(TA100 & 100C Series / AC100 / TimeLine 100)
STEP 1 •
Connection Points
STEP 2 •
Connect AdapTec TA to a Power Source
Now you can turn on the power source and start to use the terminal for time attendance.
SIREN TO ALERT TIME ATTENDANCE REPORTING
Benefits of using AdapTec TA with Siren
We recommend you to install the terminal using AdapTec TA, as an additional
port is readily built to receive the signal from FingerTec terminals. AdapTec TA is
outputs DC12V to connect to a siren. You do not need to source for an additional
DC12V power supply for this purpose.
FUNCTION • TA100 Series
The AdapTec TA is integrated to support the scheduled siren function. You can connect a bell with
the DC12V max 1A to an AdapTec TA. TA100 series is equipped with 10 scheduled bell function.
You can preset the scheduled bell inside the TA100 series by connecting the TA100 series siren
relay to the AdapTe TA.
AdapTec TA
Power Output Module
DC 12V
Rechargeable
Backup
Battery
ESC
MENU
1
4
7
2
5
8
0
3
6
9
ok
Red
Blue
Green
Power Supply/Power Input Module
AC110~240V
L - Live
N - Neutral
E - Earth
L
N
E
-V
+V
5V
Output
Input
Siren To Battery
OK
Max
1A
5V
0
C
NO
12V
0
---
+
Connection points in
TA100 Series / AC100 / TimeLine 100
AdapTec TA
Power Output Module
DC 12V
Rechargeable
Backup Battery
5V
Output
Input
Siren To Battery
OK
Max
1A
5V
0
C
NO
12V
0
---
+
Siren
TA100 Series
Siren relay
*Siren relay integrated on mcu
INSTALLATION
How to mount an AdapTec TA onto a wall
Attach the L-shape to the AdapTec TA as
shown and tighten the screws.
After removing the piece, you will have
one L-shape piece and 2 screws.
Find an L-shape piece at the top right of an
AdapTec TA . This piece is attached to the
AdapTec TA by 2 screws.
