3
4.
International Safety Certificates
UL Safety Recognition
CE
certification
CSA Safety Recognition
5.
Product Specifications
Model No.
VS08
Voltage/Frequency
110V/60Hz
220V/50Hz
Power (W)
560
Max Vacuum (mmHg)
67
0
Max Flow Rate (L/min)
110
90
Horsepower(HP)
3/4
Noise level (dB)
61
Net Weight (kg)
11
Dimension (L x W x H)
35 x 21 x 26 cm
PS: 1 mmHg
≒
0.1333kPa
≒
1.333 mbar
6.
Precautions
Please read this manual carefully before installing or operating this equipment.
The instrument should not be modified in any way. Any modification will void
the warranty and may pose a safety hazard. We are not responsible for any injury
or damage caused by any non-intended purposes and modifying the instrument
without authorization.
A. Check the voltage specified on the name-plate and ensure it matches the line
voltage in your location.
B. The pump is not completely corrosion-proof. Please do not operate it with
corrosive gases directly.
C. Install the instrument in a clean, dust-free, and well-ventilated area under
40
℃
.
D. Finetech air filters can prevent large amounts of liquid from flowing into the
pump. If needed, please contact the supplier.
If the liquid comes into the pump, please stop using and contact the distributor
immediately for service.
E. To avoid damaging the pump easily, please vent the pump before starting the
pump.
F. This pump has a thermal protection device that automatically shuts off the
pump when it becomes overheated. Keep pump upright during operation.
G. The temperature on the surface of the pump is very high after or during use.
Please don’t touch the surface to avoid being burned.
