Preparing
your FinestraMiner.
Locating
your FinestraMiner.
Mounting
your FinestraMiner.
1
Download App
Make sure your mobile phone is
connected to Wifi and your Bluetooth
is turned on. Download the
Helium
Hotspot App
onto your phone.
2
Set up Helium account.
Open the Helium app and follow the
setup instructions to set your
account up. While setting up you will be
shown 12 security keywords. Note them
down using the included note card
and pen and store safely.
You will need these to recover your
account if you lose your password.
Note:
You can connect FinestraMiner to
the internet via ethernet cable or WiFi.
Please visit
thefinestra.com/ install
to get the latest
installation instructions.
3
Attach Antenna. Power Up.
Carefully screw on the included
antenna into the jack on the side of
FinestraMiner. Plug in the power cable
into the base of FinestraMiner and plug
it into the power supply. Plug the power
supply into a wall outlet.
Please wait
2 to 3 minutes for your FinestraMiner
to boot up before starting the
installation process.
4
Connect FinestraMiner to Helium.
Using the Helium App, pair your
phone with FinestraMiner. And then
follow the instructions to connect
FinestraMiner to the Helium Network.
You can connect FinestraMiner to the
internet via ethernet cable or WiFi.
Please visit
thefinestra.com/ install
to get the latest
installation instructions.
FINESTRA
Miner
1
1
The FinestraMiner works
best when it is placed near
a window with minimal
external obstructions.
Depending on the window, and
availability of a power outlet,
you may even attach it to a
window pane using the
adhesive base.
Follow the instructions in
“Mounting your FinestraMiner”
.
Peel it.
FinestraMiner comes equipped with a
reusable adhesive base. This allows it to be
placed in the most advantageous indoor
locations for best performance - even
sloping or vertical surfaces which are flat
and smooth.
2
Do not place the
FinestraMiner near a metal
mesh, screens or large
metallic objects.
Water tanks or even large
vehicles such as a truck parked
outside could affect
performance.
Also do try to ensure that any
other electronic devices are
placed a few feet away from
FinestraMiner.
© Copyright 2021 Smart Mimic, Inc. All rights reserved.
Support
Layout Version: 1.3
SM-HW-BR-FN-04
thefinestra.com/support
2
Stick it.
Activate the reusable backing by peeling
off the protective covering - use tweezers if
needed. Once removed press your
FinestraMiner firmly against any flat
smooth surface you planned to mount it
on.
3
Remove it. Move it.
To remove or move your FinestraMiner just
grasp the edges firmly and pull away with a
twisting motion to lift one of the edges.
Then pull away further to separate it from
the surface. Do not try to forcibly pull
FinestraMiner directly away from a surface
- always pull back with a twisting motion.
window
window
Smart Mimic, FinestraMiner and the logos are the trademarks of
Smart Mimic, Inc. Helium and the Helium logo are the trademarks of
Helium, Inc. Apple and the Apple logo are trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
4
Wipe each time.
Each time you remove FinestraMiner, wipe
the adhesive backing with a clean damp
cloth to refresh the stickiness. Make sure
that backing is completely dry before use.