9
8
1. LCD display
4
4
/
5
digit, 50000 count (primary) and 9999 count (secondary)
dual display with bar-graph
2.
On screen menu selection pushbuttons
3.
P ress this pushbutt on moment arily to select trigger lev els.
P res s t his pushbut ton for more than 1 sec ond to t oggle
between positive and negative trigger slopes.
4.
Press this pushbutton momentarily to toggle between RPM
and RPM
in RPM function. Press this pushbutton for more
than 1 second to select Relative Zero.
5.
P ress this pushbutton momentarily to select Memory mode.
Press this pushbutton for more than 1 second to turn the LCD
backlight on.
6. Selector
Turn the power On or Off and select a functions.
7. COM
Common (Ground reference) input terminal for all f unct ions
except RPM function
8.
I nput t erminal f or all funct ions except C u r r e n t and R P M
functions
9.
I nput terminal (+) for R P M f unct ion. O u t p u t terminal f or
s ending out a R i c h c ommand or a L e a n c ommand for 5
seconds in O
2
Sensor test mode.
10. A/RPM-
I nput terminal (+) for current function. Ground reference (-)
input terminal for RPM function.
11.
P ress this pushbutton moment arily to ac tivate H O L D f o r
simply freezing a reading.
Press this pushbutton for more than 1 second to activate Auto
Hold for automatically capturing a stable reading, beeping to
acknowledge, and holding it on the LCD.
12.
Press this pushbutton momentarily to activate Record function.
Press this pushbutton for more than 1 second to activate 1 ms
Peak function.
3. CONTROLS AND INDICATORS
1 4
1
2
3
4
5
6
7
8
1 3
1 2
1 1
1 0
9
V Hz ms
Elec Temp
RPM + /
Signal
