◎
How to Use the controller.
●
After install the batteries of receiver collar, you will hear a sound “beep”, now press Y
button of Controller within 5 seconds, you can hear a “beep” again that means paired
successfully. If not, please release the batteries of receiver collar and install them once
again, and try the above steps.
●
Press the up and down buttons
●
Choose the different channels for 1 or 2 on
right hand side to set level. Receivers collar.
Note: If you fail to press the Y button after hearing the second beep from the
Receiver collar, you need re-sync and start with pressing the Reset button of the receiver
collar.