finder 1T Series, Manual

Page: 20 / 32

18
To return to the previous menu, press whilst to exit the advanced menu
hold down for 3 seconds, or press repeatedly, until you see the
OFF screen.
If something has changed, 3 beeps will confirm the change.
4 - ANTI-SEIZE PUMP FUNCTION
After programming the thermal differential, pressing will bring up the
following screen.
(
Anti-seize function off
)
The anti-seize pump function is a function that will configure the thermostat
as an asymmetrical timer. By setting a value between 1 and 99 hours, the
thermostat will close the output contact for 30 seconds, every time the
set time value has elapsed.
Example:
By setting with keys or the value 48 (48 hours = 2 days) and
confirming with , the thermostat will close the relay contact for 30 seconds,
every 2 days.
After enabling the function in the menu, the count will start after the last
switching off of the relay.
To step back in the menu press whilst to exit the Advanced Menu, press
and hold for 3 seconds, or press repeatedly, until the screen shows
OFF.
If something has been changed, 3 beeps will confirm the successful change.
Se qualcosa è stato modificato, 3 beep confermeranno l’avvenuta modifica.
S
E
T
S
E
T
OK
OK
OK
S
E
T
S
E
T
OK