finder 1C.71 Quick Start Manual Download Page 5

IB1C71 - 08/11

Program Review

Press        and use                keys to step through and view the program
for each day, in turn. Use        to return to main screen.

10

11

12

PROGRAM REVIEW AND COPY PROGRAMMING

Press         for 2 sec and the display will then show any  remaining
day(s)that may require copy programming - using the same procedure.
Otherwise, press         to finally exit the copy programming.

Copy Programming

Press        ; using the                keys, select the day to be copied and
press        to confirm. Then move using                keys, to day(s) 
requiring programming, selecting with       .
The day(s) concerned will then have a black background.
Continue to press the                key until the hours/temperature profile
starts to flash and then press        .
The day(s) selected will then have acquired the same program.

PRG

OK

OK

OK

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

1

2

3

4

5

6

7

OK

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

1

2

3

4

5

6

7

OK

3

5

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

1

2

4

6

7

OK

In the event of the frost protection function operating, the display will
show the Heating ON and Frost protection ON        .

This function protects the installation against freezing temperatures,
and is enabled only when the thermostat is set for Winter and is in
the OFF state.

FROST PROTECTION FUNCTION

OFF

OFF

OF F

OFF

Temperature differential

: set a value between 0.1°C and 0.9°C

using the                keys; confirm with        .

Frost protection function

: set value between 2°C and 8°C using the       

keys; confirm with        .

OK

OK

5.6

OK

°C

0.2

OK

°C

ΔT

ADVANCED SETTINGS

Switch the thermostat to the OFF state, then press the key        again
for 2 sec to set, in order:

OFF

Pump Anti-seize feature

: this is an asymmetrical recycling timer

that will cyclically run the pump for 30 seconds (ON state).
Using the                keys set an OFF state value between 00 and 99
hours and confirm with        .

0: A

OK

PRG

OK

Summary of Contents for 1C.71







Reviews: