Finch Lockwood Console Table, Product Manual

Page: 11 / 14

Long Screw x 1 PC
27mm
Short Screw x 1 PC
14mm
Plastic Anchor x 1 PC
25mm
Anti Tip x 2 PCS Lock Pin x 1 PC
A B C D E
A
D
C
B
D
E
11
WE STRONGLEY RECOMEND THIS UNIT IS ATTACHED TO THE WALL TO
PREVENT TOPPLE. KEEP YOUR PRODUCT SAFE FROM INJURY.
Assembly Steps to attach your furniture to a wall
1. Use a pencil to mark the fixing positions on the wall- ensure the drill hole position
under product top panel.
2. Drill holes (ensure the hole position be hidden by product) and insert wall plug(C)
into wall.
3. Attach L Bracket(D) into plug(C) in wall and fasten by screw(A) with screwdriver (not
provided).
4. Attach L Bracket(D) on back of product and fasten by screw(B) with screwdriver (not
provided).
5. Place the product against the wall, Secure L Bracket(D) to the L Bracket(D) on wall
by Lock Pin(E) as image shown.
Warning:
1. Please note this item need to be fixed on the wall to prevent falling forward when
product is in use.
2. Always ensure intended wall area to be drilled is free from hidden electrical wires,
water and gas pipes.
NB: Wall fixings are included-if not suitable- Please source suitable fixing for your wall
type. If in doubt please consult a qualified trades person.