1.
Safety
Prior to assembly and starting the unit, please read this manual
carefully.
Please note the following safety guidelines recommended below:
Please do not use this device on individuals who have history of
photo-sensitivity or medications increasing photo-sensitivity.
Do not use around flammable products, anesthetic mixtures or
nitrous oxide.
Do not look directly at the light when in use, always wear
industrial LED goggles as it could cause discomfort, pain or
damage.
Please do not move the light around when you have locked the
position. This will damage the machine. Always loosen any
necessary joints/bolts before adjusting then re tighten. Doing so
will avoid damage and extend the life of the machine.
Do not bend the arm further than a 90degree angle. This will cause the
arm to break.
