3. Using the Baby Monitor VB601
3.1 Setting up
Place the baby unit in a convenient location (e.g. on
a table) and point the camera lens towards the area
you want to monitor.Adjust the baby unit until you
are satisfied with the image in the parent unit.
To mount the baby unit on the wall, see section“
9.
Wall mounting instructions
”for more details.
NOTE
Do not place the baby unit within baby’s reach! If
there is interference on the picture or sound, try
moving the units to different locations, and ensure
they are not close to other electrical equipment.
3.2 Pairing camera
The enclosed baby unit has already been registered ,
You do not need to register it again unless the baby unit
loses its link with the parent unit. See section “5.2
Camera Registration” for more details.
3.3 Night vision
The baby unit has 8 high-intensity infrared LEDs for
picking up clear images in the dark. When the built-in
light sensor detects a low level of ambient light, the LEDs
will automatically activate.
3.4music player
Press and hold
key at least 3 seconds will turn
on the music player and play lullaby through the baby
unit; long press the key 3 seconds again will turn off it.
3.5 Talk function
Press and hold
key on the parent unit to talk to
your baby through the baby unit loudspeaker. The
symbol will be displayed at the bottom of the screen.
3.6 Adjusting the volume
When the video is playing mode, press ‘-’ key to
decrease volume or ‘+’ key to increase volume. The
display will show the current volume for 5 seconds.
4. Monitoring Screen Icons
1.
Signal strength indicator
2.
Temperature of the baby’s room
3.
Lullaby is playing
4.
Alarm activated
5.
Battery indicator
6.
PTT function activated
7.
Date and time ( DD/MM HH:MM AM/PM)
5. Menu Options
5.1 Main menu
Press “Menu” key at monitoring screen will enter the
main menu, It contains 4 items :
1.
Camera
2.
Alarm
3.
Settings
4.
System info
You can press the “Up” key or “Down” key to move
the cursor to select an item and press “Menu” key will
enter the sub-menu which you selected.
Press “Return” key will back to monitoring screen.
5.2 Camera Registration
Press “menu” key to entry registering screen, then
push the pair key on the back of baby unit within 10
seconds.
5.3 Alarm
Press “Down” key to choose item, ”PTT” key to
move the cursor and “Up” key to change
value .
5.4 Settings
5.4.1 Language
Language setting menu allows you to choose your
language from the following :
English
French
Italian
Spanish
German
5.4.2 Time and date
There are contains 2 items in this menu
Set time / date
Set format
Press “Down” key to choose item, ”PTT” key to
move the cursor and “Up” key to change value .
5.4.3 Temperature unit
Switch the unit to
Celsius or Fahrenheit
5.4.4 Anti-flicker
You are able to adjust the frequency of 50 / 60 HZ to
suit your lighting for anti-flicker
5.4.5 System mode setting
This menu allows you to choose the working mode
from the following: Normal mode / VOX mode
5.4.6 LCD backlight
You are be able to adjust the brightness of the LCD
you are viewing and the LCD backlight active time
in menu operation.
5.5 System info
There are contains system information such as
Software version ,Hardware version, build date etc.
6. Wall mounting instructions
1.
Use the template below to mark the wall in the
correct places to drill holes for wall-mounting screws
2. Insert 4mm head screws (not supplied) into the holes
and tighten the screws. Then, align your baby unit with
the screws and push it down.
3.
Point the camera lens towards the area you want to
monitor. Adjust the baby unit until you are satisfied with
the image in the parent unit.
