Page 2
Model: TSSK
-
300 (5301337)
(300 Gallon Skid
-
Mounted High Pressure Sprayer
w/160cc Honda Engine & Electric Hose Reel)
Technical Specifications
•
300 Gallon Polyethylene Tank
•
160cc Honda Engine, Recoil Start
•
Medium Pressure Diaphragm Pump
•
Maximum Flow = 9.6 GPM
•
Maximum Pressure = 580 PSI
•
Maximum Temperature = 140°F
•
GunJet Spray Gun w/1/2
”
x
300’
of Hose
Caution: When fully filled with water, this sprayer will weigh approx. 3,095 lbs..
Consult the owner
’
s manual for your vehicle to verify that you are within it
’
s load carrying capacity.
Contents
Technical Specs and Assembly Instructions
...........................
2
Sprayer Parts List
................................................................
7
Operation
...............................................................................
3
Electrical Components Exploded View/Parts List
...............
8
Maintenance, Tank Care and Winter Storage
........................
4
Sprayer Dimensions
...........................................................
8
HP Spray Gun and Lawn Spray Gun Info
.................................
5
Pump Troubleshooting
.......................................................
9
Sprayer Exploded Views
....................................................
6
-
8
Warranty
..........................................................................
10
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~IMPORTANT~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Remove tank lid and be sure the tank is clean and free of any foreign material. Rinse tank out of any tank residue before filling with
water to test.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~IMPORTANT~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It is VERY important to test this sprayer with plain water before actual spraying is attempted. This will enable you to familiarize
yourself with the sprayer and check for leaks without the possibility of losing any expensive chemicals.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~WARNING~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Read and Understand
the Owner
’
s Manual before using this sprayer. Test and use in accordance to instructions.
Read and Follow
chemical label instructions and wear
protective gear when filling, using, cleaning and
servicing the sprayer.
Exercise Caution
in vehicle handling when towing/hauling a filled sprayer to avoid loss of control or overturning.
Keep Sprayer and Spray materials
away from other people, children and pets.
Do Not Turn on Power
to the sprayer, until ready to spray in order to avoid unintentional spray release.
Do Not Use
on steep slopes. A full sprayer could cause loss of control or overturn sprayer and vehicle.
Always operate
up and down a slope, never across the face of a slope.
Keep all movement on slopes
slow and gradual. Do not make sudden changes in speed, directions or turning. Do not start or stop
suddenly when going uphill or downhill.
Stop on level ground,
set the parking brake and shut off engine before leaving the operator
’
s position for any reason.
Keep all parts
in good condition and properly installed. Fix damaged or warn parts immediately.
Caution should be taken
when towing and/or using any sprayer. This sprayer combined with the weight distribution, turning radius
and speed of vehicle can result in damage to vehicle and/or sprayer or severe injury or death, if not used properly.
Improper use of this sprayer or handling of chemicals could result in serious injury or illness, or could cause damage to the envi-
ronment.
Assembly Instructions
The sprayer is completely assembled. It is ready to operate after mounting it securely on a truck bed.
Make sure all hose clamps are tight before testing or spraying for the first time.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~IMPORTANT REMINDER~~~~~~~~~~~~~~~~~~~~~~~~~~~
ADD proper oil to the engine crankcase and gasoline to the gas tank. Refer to the engine manual for the correct type and amount.
**The Sprayer is now ready to TEST w/plain water before actual use**
