16
DAILY MAINTENANCE
1. CLEANING THE RECOVERY TANK
WARNING
: Always wear gloves when doing this operation to protect
yourself from contact with hazardous solutions.
Figure 29
1.
Disconnect the power supply connector located between the suction cowling and the
recovery tank (1).
2.
Remove the suction unit from the tank after freeing it from the two safety hooks (2)
Figure 30
3.
Rinse the inside of the tank with a jet of running water and drain directly using the tube
(fig.25)
2. CLEANING THE SUCTION FILTER
Figure 31
1.
Remove the suction unit from the tank (fig.29)
2.
Remove the black guard by making a circular movement (1).
3.
Detach filter (2) and clean it carefully with a jet of water.
4.
Reinstall everything by performing these procedures in reverse order
3. CLEANING THE SQUEEGEE
Figure 32
Check that the squeegee is always clean. This ensures optimum drying.
To clean it:
1.
Remove the suction tube from the squeegee.
2.
Unhook the squeegee, pushing hook-up plate (2) backwards.
3.
Unhook the body from its support by pushing it towards the back of the machine and
removing it from the side.
4.
Carefully clean the inside of the squeegee
5.
Carefully clean the squeegee rubbers
6.
Reinstall everything
1
2
2
2
1
1
2