FIK-RVM Product Installation Document —
P/N LS10311-000FK-E:A 03/04/2021
3
3.1 Microphone Installation
1. Clip the microphone into the microphone clip. See Figure 1.3.
Figure 1.3 Hang Microphone into the Microphone Clip
2. Insert the microphone cord through the hole at the bottom of
the dead front panel. See Figure 1.4.
Figure 1.4 Microphone Cord Inserted Through the Dead Front
Panel Hole
3. Attach the strain relief clip to the microphone cord. The strain
relief clip should have about 2¾”(6.98cm) of the microphone
cord through it. See Figure 1.5.
4. Push the strain into the hole in the dead front panel.
5. Connect to the FIK-RVM board.
6. Restore the AC power and reconnect it to the backup batteries.
Figure 1.5 Strain Relief Clip Installation
microphone
clip
2 3/4” (6.98cm)
