Fike FIK-RA100BD, Product Installation Document

Page: 2 / 2

2
FIK-RA100BD Product Installation Instructions —
P/N LS10260-001FK-E:A 03/03/2021
3 Wiring the FIK-RA100BD
To wire the FIK-RA100BD, refer to Table 1 and Figure 2.
Figure 2 shows the wiring connections of the FIK-RA100BD to the FACP.
Figure 2 Wiring the FIK-RA100BD
4 Programming
The FIK-RA100BD must have the dip switches set to match the existing FIK-RA100BD, if possible. See Figure 3 for the device IDs and the
corresponding dip switch settings. If you match the existing device ID, you need to program the new FIK-RA100BD. If you use a different
device ID, you must program the FIK-RA100 into the Fike, ECS FACP. For programming information, refer to the Fike Series, ECS Installa-
tion Manual (PN LS10262-001FK-E).
Figure 3 DIP Switch Settings for the FIK-RA100BD Device ID
FIK-RA100BD
Terminals
ECS FACP
SBUS Terminals
SB B
SA SA
S+ +
S– –
Table 1 FIK-RA100BD to ECS FACP Terminal Connections
FIK-RA100BD
*Note: Address 0 cannot be used.