2
FIK-RA100 Product Installation Instructions —
P/N LS10205-002FK-E:A 03/08/2021
2 Mounting the FIK-RA100
2.1 Flush-Mounting
To flush-mount the FIK-RA100, refer to the following steps
1.
The backbox dimensions are 9-3/8”W x 8-3/8”H.
2.
Before you complete the FIK-RA100 installation, mount the backbox using any of the mounting holes as shown in Figure 2.
.
Figure 2 Backbox Mounting Holes
3.
Remove the knockout holes as needed for wiring. To locate the backbox knockout locations, refer Figure 3.
Figure 3 Backbox Knockout Locations
4.
Wire the annunciator board to the main control panel. See Figure 7.
5.
Use the supplied screws to attach and secure the annunciator/door assembly to the backbox as shown in Figure 4.
Figure 4 Attaching the Annunciator/Door Assembly to the Backbox
mounting holes
mounting holes
wire knockouts
wire knockouts
wire knockouts
