Operation guide: Turn on the device by rotating the "Power/Volume" knob, switch to
USB input, and then hold the "Previous track" button on the left side still and plug in
the USB cable to connect to the computer. After connected, please choose the
corresponding output device.
b. When using the device with a Windows computer for the first time at USB2.0 mode,
please go to our website to download the driver and follow the corresponding
instructions to install the driver.
Download link: http://www.fiio.com/supports
c. When using with a MAC OS computer, it doesn't need any drivers. After connected,
please choose the corresponding output device.
d. Using the included Lightning-Micro USB cable to connect the
Q5s
with your
iPhone/iPad/iPod and play the music on your iOS device, then you could better enjoy
your Hi-Res music.
It's recommended to set the system output volume on computer to the max level and
then adjust the output volume of the Q5s to a suitable level with its volume knob.
Firmware update
The Q5s supports firmware update, please go to www.fiio.com/supports to check for
the instructions.
Precautions
★Please set the volume with moderation to protect your hearing and your audio
equipment.
★Please take off the headphone from your ears before plugging or unplugging the
headphone to avoid any possible impulsive sound damaging your hearing.
★Do not disassemble, expose the unit to water or carry out unauthorized repair on
the unit.
★If the unit is to be left unused for a long time, it should be recharged periodically to
preserve its battery life.
★Your hearing and environmental awareness are affected when using headphones.
For your own safety, please do not use headphones in dangerous environments.
★If the system shows an error, please try to press the "Reset" button with a φ1mm
insulating pin for 5s to restore to normal operation.
