light flashes every 3
seconds
Sampling rate ≤ 48kHz:
Blue
light constantly on
Sampling rate>48kHz:
Yellow light constantly
on
DSD:
Green
light
constantly on
BYPASS:
Light P on
Operation Instruction
Power on:
Short press button C after connecting the BTA30 Pro to a power supply.
Power off:
When the BTA30 Pro powers on, hold button C for about 5s until all
indicator lights turn off.
Play/Pause:
In RX mode, short press button D.
Factory data reset/Clear pairing:
When the BTA30 Pro powers on and not in pairing
state (in RX/TX/DAC mode), hold button C+D for about 5s at the same time.
Force a pairing:
When the BTA30 Pro powers on and in RX/TX mode, hold button C or
D for about 3s until Light Q flashes alternately in red and blue.
Reconnecting state:
Light Q will fast flash 2 times in blue every 2 seconds.
Input source switch:
When the BTA30 Pro powers on and in TX/DAC mode, short
