5
1.2) Secure the grille.
With the screwdrivers inserted and
loaded as described in step 1.1, carefully place the grill in
the grille opening. Position the grille to flow with lines of the
vehicle. Tighten the screws through holes as shown in
Figure 3. The screws are self-tapping in nature, but will
require a moderate amount of pressure to start. Press and
turn the screwdriver at the same time and tighten fully.
Figure 3.
Tighten screws through these holes to secure.
2) INSTALL REAR GRILLES
2.1) Prepare rear bumper cover.
The rear grilles require
1/8” holes in the locations shown in Figure 4. Carefully drill
these holes approximately 1/8” from the rear edge of the
opening.
2.2) Secure rear grilles.
Feed the rear grille from under the
vehicle. Feed a tie mounts through each hole in the bumper
cover and then twist tie the rear grille in place.
