1
1-52
Installing User Software on a Windows Computer
Setting up SMB printing on Windows 2000/XP/Server 2003
SMB printing (also known as Windows printing) allows you to install the printer
driver and associated files, and print from your computer to a particular print
connection (Hold, Print, or Direct) on the Fiery X3e. These instructions assume you
have installed the TCP/IP protocol and Client for Microsoft Networks.
Each connection (Hold, Print, or Direct) requires a new printer driver and printer
description file. To set up printing to a second or third print connection, repeat the
procedure,
“To set up SMB printing on Windows 2000/XP/Server 2003”
. If you
install more than one printer, give each a descriptive name during printer driver
installation, such as
Aero-Print
or
Aero-Hold
, so you can easily identify printers.
B
EFORE
YOU
BEGIN
•
Configure the Fiery X3e for SMB printing in Network Setup>Service
Setup>Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map,
and on the Configuration page. For more information, see the
T
O
SET
UP
SMB
PRINTING
ON
W
INDOWS
2000/XP/S
ERVER
2003
1.
Open My Network Places.
2.
Browse for the printer you want to print to.
The printer name you are browsing for is the name entered in Network Setup>
Service Setup>Windows Setup > Server Name. For this information, see the
Configuration page.
The amount of network traffic determines the amount of time required for the
Browse function.
