1
1-35
Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003
4.
Double-click the name of the connection you want to print to.
The Printers dialog box appears, asking whether you want to set up the printer.
5.
Select Yes to complete the installation for the selected connection.
Windows NT 4.0 downloads the printer driver and printer description files from the
Fiery X3e to your computer and installation is complete.
Setting up PostScript or PCL printing with Windows
2000/XP/Server 2003
To set up the Fiery X3e as a PostScript or PCL printer, you must install the PostScript
or PCL printer driver for Windows 2000/XP/Server 2003 and the corresponding
printer description files. You must also configure the print connection between the
computer and the Fiery X3e. If you are printing over a network, you must configure a
network connection. If you are printing directly to the printer, you must configure a
parallel port connection.
N
OTE
:
For Windows Server 2003, use the Windows 2000/XP printer driver.
N
OTE
:
The procedures for configuring the options for the PostScript and PCL printer
drivers are similar. The following illustrations show the PostScript driver. Differences
are noted.
Installing the PostScript or PCL printer driver for Windows
2000/XP/Server 2003
The following procedure describes installing the printer driver from the User
Software CD or from the Installer WebTool. Subsequent procedures describe setting
up the print connection.
If you are upgrading from an earlier version of the software, use the Fiery Printer
Delete Utility to remove old printer drivers. For details, see
