manualshive.com logo in svg

FieldServer FS-8707-06, Driver Manual

Share
Download
FieldServer FS-8707-06 Driver Manual Download Page 3

FS-8707-06 FST OPC Server for FieldServer   

 

 

 

 

 

Page 3 of 15 

FieldServer Technologies

 1991 Tarob Court Milpitas, California 95035 USA   

Web

: www.fieldserver.com 

Tel

: (408) 262 2299   

Fax

: (408) 262 2269   

Toll Free

: (888) 509 1970   

email

: [email protected] 

1

 

 FST OPC SERVER FOR FIELDSERVERS DESCRIPTION  

This OPC Server (I/O Driver) communicates with the FieldServer.  The method of data transfer is called Data Array 
Access (DAA).  The Data Arrays are arrays of typed data memory in the FieldServer.  The source of the information 
in the Data Arrays can be any one of the standard FieldServer I/O Drivers.  It is incumbent on the user to configure 
the  ports  and  the  Map  Descriptors  on  the  FieldServer.    The  Map  Descriptors  are  FieldServer  objects  containing 
polling instructions for an I/O Driver to copy data from the Low level Devices into a Data Array.  One of the many 
advantages  of  this  architecture  is  that  it  allows  many  disparate  proprietary  devices  PLC/DCS’s  etc.  to  share 
common data in a reliable embedded device (FieldServer) while providing access to the SCADA/PC application level 
via this OPC Server.  FST OPC Server supports simultaneous communication to up to 10 OPC Clients. 

Please refer to the FieldServer Configuration Manual for instructions on configuration on the FieldServer side, the 
tools required are not part of this package.

  

FieldServer 
Mode 

Nodes 

Comments 

Client 

Unspecified 

There  is  no  known  limit  to  the  number  of  OPC  Servers  that  can  connect  to  the 
same FieldServer provided they are on different workstations. 

Server 

10 

FST OPC Server supports simultaneous communication to up to 10 OPC Clients 

 

1.1

 

OPC Version Supported 

The FST OPC Server supports OPC Version 2.05. 

1.2

 

Compatibility Matrix  

FieldServer Model 

Compatible with this driver 

FS-B-OPC-01 

Yes 

FS-x2010 

Yes 

FS-x2011 

Yes 

FS-x25 

Yes 

FS-x30 

Yes 

FS-x40 

Yes 

ProtoCessor FFP-FO2 

Yes 

ProtoNode LER/RER 

Yes 

ProtoCessor FFP- FD2 

Yes 

QuickServer- QS-1010  Yes 
QuickServer QS-1011 

Yes 

 

Summary of Contents for FS-8707-06
















Reviews:

No comments

Brands by name

Popular brands

Load more brands