8
Check for parts online at
www.getfieldsedge.com
or call 800-345-6007 M-F 8-5
Operator's Manual
String Mower M220
How to Raise the Handle
1. Hold the handle with one hand and loosen both handle
adjustment cams until the ratchet teeth are disengaged.
Do not remove the handle adjustment levers.
2. Raise the handle to the operating position.
3. Stand in the operator’s position behind the mower. Put
the handle in a comfortable position. Make sure both
sides of the handle are level.
NOTE: Make sure the cables are not caught between the
upper and lower handle.
4. Tighten the handle adjustment levers. Make sure the
handle pivots are locked in place.
NOTE: The handle height is adjustable. See “How To
Adjust The Height Of The Handle” in the Service
and Adjustment section.
5. To attach the recoil start handle to the rope guide, twist
the rope through the rope guide mounted on the right
side of the handle.
SEE FIGURE 3.
6. Check mower head. Make sure no more than 1" of line
is exposed out of the outfeed hole. If longer than 1" it
is possible to have line thrown out of head early.
SEE
FIGURE 10 (PAGE 12)
ASSEMBLY
To Remove the Mower from the Carton
1. Remove any of the loose parts in packaging, including
the parts bags, from the carton.
2. Remove the packing material positioned around the unit.
3 Cut down all four corners of the carton and lay the side panels
flat.
4. Pull the mower out of the carton.
SEE FIGURE 2
Contents of Parts Bag
•
Owner’s Manual
•
Engine Manual
•
Warranty Card
•
Replacement Mower Line
•
L-Handle Allen Wrench
•
Spark Plug Wrench
•
Safety Goggles
WARNING
USE THE CORRECT PERSONAL PROTECTION.
WEAR SAFETY GLASSES OR EYE SHIELDS WHILE
ASSEMBLING OR OPERATING THE STRING
MOWER.
REMOVE SPARK PLUG WIRE FROM SPARK
PLUG BEFORE DOING ANY ASSEMBLY OR
MAINTENANCE TO THE STRING MOWER.
HANDLE
ADJUSTING
CAM
ROPE
GUIDE
FIGURE 2:
Your New String Mower as it is shipped to you.
FIGURE 3:
Adjusting the Handle Bars.
