1.1.
GENERAL SAFETY INSTRUCTION
DANGER
The machine must be used only by authorized and well-trained operators. The operator
must have read and understood the instructions of this manual. They must make adequate
preparation for the proper use of the machine and in case of doubt about the use of the
machine and/or the interpretation of this manual the operator must contact the
Manufacturer or the Dealer immediately.
WARNING
The manual must always remain with the machine. In case of loss or damage, request a
new copy from the Manufacturer or your Dealer.
WARNING
Follow strictly the rules prescribed by the safety pictograms applied to the machine.
WARNING
Be sure that all safety pictograms are legible. If pictograms are worn, they must be replaced
with others obtained from the Manufacturer and placed in the position indicated by this
manual.
DANGER
Before using the machine, make sure that all safety devices are installed and in good
working conditions. In case of damages of shields, replace them immediately.
DANGER
Is absolutely forbidden to remove or alter safety devices.
DANGER
Before starting and during operation of the implement make sure there are no people or
animals in the area of operation: the machine can project material from the back, front or
side, with risks of serious injury or death.
DANGER
Pay maximum attention to avoid any accidental contact with rotating parts of the machine.
DANGER
During operation, adjustment, maintenance, repairing or transportation of the machine, the
operator must always use appropriate Personal Protective Equipment (PPE).
