EN
10
FZS 3002-B
Assembly
5. ASSEMBLY
Using the four included screws, attach the engine
of the brush cutter to the shaft (see fi g. 2).
Install the protective guard on to the shaft using
the supplied screws and nuts (see fi g. 3)
Install the handle into the mount (see fi g. 4). The
handle can be moved along the shaft. In this
way, everybody can select the ideal comfortable
working position. After selecting the ideal working
position, tighten the screws.
Fasten the control cable to the shaft using the
supplied draw bands.
Fig. 4
Fig. 3
Fig. 2
Screw
Nut
