Fieldmann FZR 5114-170 BV, Instructions For Use Manual, Page: 9 / 28

EN
PETROL LAWNMOWER USER’S MANUAL
9
3. ASSEMBLING THE GRASS CATCHER
Secure the plastic hooks at the end of the textile part of the grass catcher into the steel frame (Fig. 4).
Fig. 4
IMPORTANT:
The grass catcher is equipped with a full indicator. It is a plastic flap at the rear of the grass
catcher. When the grass catcher is not full, the flap is raised. When it closes, it is necessary to tip out the
grass catcher.
6. BEFORE STARTING THE LAWNMOWER
ADDING OIL
The lawnmower is supplied without motor oil.
Before first start up, add motor oil SAE30 or 15W-
40 (approx 600 ml) according to the following
instructions.
1. When pouring in the oil, place the lawnmower on a level
surface.
2. Pull the cap with the oil dipstick out of the oil refill hole (Fig.
5).
3. After adding oil, put the dipstick back into the hole and
tighten it.
4. The oil level must lie within the dipstick’s hatched section
and should not exceed the arrow level mark (Fig. 5).
Caution!
DO NOT OVERFILL the oil tank, otherwise a large amount of smoke will come out of the exhaust
when the lawnmower is started up.
IMPORTANT INFORMATION:
Check the oil level before every use of the lawnmower. Add oil if
necessary. Add oil up to the MAX level mark on the oil dipstick.
IMPORTANT INFORMATION:
Replace the oil after the first 5 hours of operation and subsequently after
every 25 hours of operation.
ADDING FUEL
The suitable type of fuel for this engine is NATURAL 95
After unscrewing the fuel tank cap (Fig 1 – point 10), add the fuel, pouring it in all the way up to the collar of the
Fig. 5
Assembling the lawnmower | Before starting the lawnmower