Fieldmann FZR 2110-LI, Manual, Page: 12 / 24

EN
CORDLESS LAWN MOWER USER’S MANUAL
Operation
13
6. OPERATION
6.1 SETTING THE MOWING HEIGHT
ATTENTION! Before setting the mowing height, always make sure that the lawnmower is turned off and
the blade is not moving.
ATTENTION : The blade will rotate for several seconds after the lawn mower is turned off. A rotating blade
can cause injuries.
Fig. 4
The mowing height is set in 3 positions independently on the front and rear
wheel axle.
1. position 20 mm
2. position 38 mm
3. position 56 mm
Setting the height of the front wheels – pull the wheel away from the grass catcher and select the desired height.
Follow this procedure for both front wheels. Setting the height of the rear wheels – pull the wheel towards the
grass catcher and select the desired height. The height should be the same as on the front wheels (Fig. 4).
Note : Lawns of standard grass blends should not be mowed to less than 4 cm. Lawn should not be
shortened by more than 1/3 of its height.
6.2 SETTING THE HANDLE HEIGHT
The handle height can be set to your needs.
Release the clamping levers (fi g.1, point 7) on both handle sides.
Set the required height of the handle by moving it up or down. Then secure with the quick clamping levers.
6.3 CONNECTING THE BATTERY
Open the battery cover (Fig. 5, point1)
Insert the battery and click it into place (fi g. 5 point 2)
Slide the safety catch into the mower body (Fig.5 point 3).
Fig. 5