Fieldmann FZR 2003-E Manual Download Page 12

13

USER‘S MANUAL

ELECTRIC ROTARY LAWNMOWER

EN

Lawnmower assembly | Setting the mowing height

4. LAWNMOWER ASSEMBLY 

The lawnmower is supplied disassembled. The complete adjustable handle and collection box 
must be assembled before starting work. Proceed step by step according to the user‘s manual 
and use the pictures as a guide so that the assembly process is as easy as possible.

Connect the cable pull reduction clips. (see pic. 2)
Using the screws and plastic nuts attach the top part of the hande to the bottom bar set 
(see pic. 3).
Insert the bottom part of the handle into the appropriate openings and secure using fastening
screws (see pic. 4).
Put the wheels on the axles, secure using cotter pins by bending the free ends around the axle
and attach the wheel covers (see pic. 5) and (see pic. 6)
Secure the attachment of the electric power cable to the handle using the cable clip 
(see pic. 7).
Attach the top part of the collection box to the bottom part by clicking in the mouldings along
the edge (see pic. 8).
Lift the rear tipping part of the machine and attach the clippings collection box (see pic. 9).

5. SETTING THE MOWING HEIGHT

ATTENTION:

 Do not touch the mowing blade!

You can set the desired mowing height by setting the front and rear axle from underneath under 
the lawnmower cover.

ATTENTION:

 Before setting the height, disconnect the machine from the power source and 

check

that the blades have stopped rotating.

1. Setting the height of the front axle (see pic. 10)

Press on the front axle in the direction towards the front part of the lawnmower. 

t

Move the axle to the position corresponding to your required mowing height.

t

2. Setting the height of the rear axle (see pic. 11)

Press on the rear axle in the direction towards the back fl ap of the lawnmower.

t

Move the axle to the position corresponding to your required mowing height.

t

Note:

 Check that both the front and rear axle are set to the same mowing height.

3. Mowing height (see pic. 12)

25 mm (lowest position)

t

40 mm

t

55 mm (highest position)

t

Summary of Contents for FZR 2003-E
























Reviews: