Fieldmann FZP 3001-B, Instructions For Use Manual

Page: 21 / 29

21
EN
INTSTRUCTIONS FOR USE CHAINSAW
Fuel and chain lubrication oil | Motor operation
8. FUEL AND CHAIN LUBRICATION OIL
Fuel
(fig. 7)
Mix common petrol (lead or lead-free, alcohol-free) with quality oil used in air-cooled two
stroke engines (manufacturer recommended oils).
Recommended fuel mixing ratios:
When using Petrol: Oil
up to 20 hours 20:1
over 20 hours 25:1
25:1 Mixing ratio table
Liters of petrol 1 2 3 4 5
Oil for two-stroke engines in ml 40 80 120 160 200
CAUTION!
Do not smoke or use naked flame in fuel storage area and when handling the
fuel.Please mix and store the fuel in a dedicated petrol can only.
Note:
Used fuel is the usual cause of most engine failures. Do not mix petrol with oil
designed for four-stroke engines.
Chain lubrication oil
(fig. 8)
Please use engine oil SAE#10W~30 all year round, engine oil SAE#30~#40 in summer and
engine oil SAE#20 in winter (manufacturer recommended oils).
Note:
Do not use already used or recycled oil; otherwise, oil pump damage could occur.
9. MOTOR OPERATION
ENGINE STARTUP
Add fuel or chain lubrication oil and tighten the filler caps. (fig. 9).
Set the switch to „I“ position (fig. 10).
Hold the throttle control lever and the lock simultaneously, press the side plate and then
release the throttle lever which will remain in its starting position (fig. 11).
Chain lubrication oil (1) (fig. 9).
Fuel (2) (fig. 9).
Switch (3) (fig. 11).
Throttle control lever arrest (4) (fig. 11).