Fieldmann FZN 2001-E, User Manual, Page: 6 / 92

EN 5
FZN 2001-E
Putting into operation | Instructions for correct use
4. PUTTING INTO OPERATION
Turning on the machine
The power plug located on the machine (pic. 1, no. 5) must be connected to an extension cord
(not included), secured by the pull reduction (no. 6)
Connecting to a power source
ATTENTION: Before connecting to a power source, always check that the switch is turned off.
Connect the power plug to the power source with current protection.
Hold the handle of the machine and with the thumb press the safety switch (pic 1, 3) and then press
the main power switch of the machine (5). Turn off the machine by releasing the main power switch.
ATTENTION:
Press or release the start switch carefully according to the manufacturer's
instructions. The machine will continue to slow down for a few seconds after it is turned off.
Wait until the motor and cutting blades are still before turning the machine on again. Do not switch
the machine on and off in short succession.
5. INSTRUCTIONS FOR CORRECT USE
Do not work with the hedge trimmer barefoot or with open sandals. Always wear solid, closed
footwear and long pants. It is recommended to use heavy duty gloves, non-slip footwear and
protective glasses.
Thoroughly check the area where you will be using the trimmer and remove all wires and other foreign objects.
Thoroughly check the blade assembly for damage before starting work with the trimmer. Do not use
damaged tools.
Never remove broken branches and trimmings with your hands while the hedge trimmer is running.
Learn how to quickly stop the hedge trimmer if necessary.
Never use a hedge trimmer with damaged or incorrectly attached protective cover.
Always hold the trimmer with both hands when working.
Ensure that all nuts and bolts are fi rmly pulled tight, so that the trimmer always remains in safe
working order.
Make sure that the tool does not overheat because continuing to work with the trimmer would
damage components.
Do not place any items on the top part of the tool.
Do not repair the tool yourself and please have it repaired by an authorised service centre or the vendor.
Keep the power cord at a safe distance from the work area.
Before starting work, check that the power cord is not damaged and if necessary have it replaced.
Turn off the tool and disconnect the power plug from the power socket before performing any
adjustments, cleaning or when the power cord is cut, damaged or tangled.
The blades will continue to move several seconds after the trimmer has been turned off. Caution!
Do not touch the moving blades.