EN
BLOWER WITH VACUUM KIT
USER'S MANUAL
11
When the engine starts
Fuel discharge line
Fuel primer bulb
5. WHEN THE ENGINE STARTS
IMPORTANT
For maximum vacuum performance and operating life, allow the engine to warm before use.
1. Run the engine at idle speed until operating temperature is reached(2 to 3 minutes)
2. As the engine warms, open the choke gradually by slowly pushing the choke control in to the fully retracted
position.
3. The machine should now be ready for use.
If the engine dose not start
Repeat the appropriate starting procedures for “hot” or “cold” engine. If the engine still will not start, follow the
“Starting a Flooded Engine” procedure (below).
WARNING!
Incorrect spark plug installation Can result in serious engine damage!
Choke rod
Starting a fl ooded engine
1. Disconnect the spark plug lead, and use the spark plug wrench to remove the plug in a counterclockwise
direction.
2. If the spark plug is fouled or is soaked with fuel, clean or replace the plug as required.
Summary of Contents for FZF 6205-B
