Fieldmann FZD 5015 E, User Manual

Page: 13 / 88

EN
GARDEN SHREDDER USER'S MANUAL
13
Operating the shredder
Protection against overload
The shredder is equipped with overload protection (Fig.7, point 4)
In the event of an overload, the motor protection will automatically disconnect the electrical circuit.
To renew functionality, proceed as follows:
1. Turn off the machine so that it is without voltage.
2. Remove the material that clogged the shredder.
3. Allow the motor to cool down for at least fi ve minutes!
4. Press the safety fuse button (Fig. 7, point 4).
5. Reconnect the electrical power supply.
6. Turn on the shredder.
ATTENTION: To prevent accidents, to remove jammed objects, always use a hook or a stick.
Collection box
Always turn the shredder off and disconnect it from the power supply before attaching or removing the
collection box.
For safety reasons, the handle of the collection box (Fig. 6, point 1) is equipped with a safety lock.
For safe operation, check the working order of the safety lock after every two hours of work.
Never attempt to put the safety lock of the handle out of operation.
Handle of the collection box:
Handle in the lowered position >>> the collection box is not locked. The safety lock is activated,
the shredder cannot be started.
Handle in the raised position >>> the collection box is locked and the shredder is ready for work.
NOTE: The machine will not start if the collection box is unlocked. The machine will automatically turn off
when the collection box is released during operation.