EN
HIGH PRESSURE CLEANER
USER’S MANUAL
11
Proper use of the pressure cleaner
7. PROPER USE OF THE PRESSURE CLEANER
THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY!
DO NOT USE HOT WATER IN THIS PRESSURE CLEANER.
1. Operate the pressure cleaner at no more than the fluid pressure rated for the pressure cleaner. Never run
the pressure cleaner without a water supply. Running the unit without a water supply will cause irreparable
damage to the unit.
2. Make sure that the water supply you use for the pressure cleaner is not dirty, sandy, and does not hold any
corrosive chemical products. Using a dirty water supply will compromise the long life of the pressure cleaner.
3.
CAUTION
- The pressure cleaner can be used for a variety of applications including washing cars,
boats, patios, decks, garages etc. where high pressure is necessary to remove dirt and debris.
High-pressure water flow can damage the work surface if not used properly!
See the
section titled “Operating Instructions” for more details. Always test the spray in an open area first.
4. NEVER move the unit by pulling on the high pressure hose. Use the handle provided on the top of the unit.
5. Always hold the high pressure gun and wand with two hands. Keep one hand on the gun/trigger, while
supporting the wand with the other hand (see diagram).
6. When dispensing detergent, the pressure cleaner applies detergent to the cleaning area at low pressure only.
Once the detergent has been applied, spray the detergent off of the work area by using the adjustable nozzle.
